Cephalometric and digital model analysis of dentoskeletal effects of infrazygomatic miniscrew vs. Essix- anchored Carriere Motion appliance for distalization of maxillary buccal segment: a randomized clinical trial.

TRIAL DESIGN: Parallel. OBJECTIVE: To compare skeletally anchored Carriere Motion appliance (CMA) for distalization of the maxillary buccal segment vs. Essix anchored CMA. METHODS: Thirty-two class II malocclusion patients were randomly allocated into two equal groups. One group was treated with infrazygomatic (IZC) miniscrew- anchored CMA (IZCG) and the other group treated with Essix retainer- anchored CMA (EXG). Two lateral cephalograms and two digital models for upper and lower arches were taken for each patient: immediately before intervention and after distalization had been completed. RESULTS: Distalization period was not significantly different between the two groups. In contrast to EXG, IZCG showed insignificant difference in ANB, lower incisor proclination, and mesial movement of the lower first molar. There was significant rotation with distal movement of maxillary canine and first molar in both groups. CONCLUSION: IZC anchored CMA could eliminate the side effects of class II elastics regarding lower incisor proclination, mesial movement lower molars with a more significant amount of distalization of the maxillary buccal segment but with significant molar rotation. TRIAL REGISTRATION: The ClinicalTrials.gov Protocol Registration and Results System (PRS) has this RCT registered as (NCT05499221) on 12/08/2022.

Reflection on patients' experience with orthodontic appliances wear and its impact on oral health related quality of life: observational comparative study.

BACKGROUND: The objective of this study was to explore and compare patient's experience with the use of a removable functional appliance or fixed orthodontic appliance and its influence on oral health-related quality of life. MATERIAL AND METHODS: This clinical trial included 81 participants having Class II Division 1 and age ranging between 10 and 16 years. The participants were included in any of a three equal groups according to the set inclusion and exclusion criteria; Group 1: patients treated with a Twin-Block functional appliance; Group 2: patients treated with a fixed orthodontic appliance only; and Group 3 (control group): patients not in orthodontic treatment yet. The COHIP SF-19 was used. Patients were given the questionnaire as follows: Group 1: (1) after at least 8 months from starting treatment; (2) after completing phase 1 by 2-3 months without wearing the appliance; Group 2: (1) just before debonding; (2) after finishing the treatment by 2-3 months without any appliances; and Group 3: (1) at the patient's first visit to the orthodontic clinic; (2) after 2-3 months from the first visit to the orthodontic clinic and before starting any treatment. RESULTS: The 81 participants were 31 males and 50 females with median age of 13 years. The total COHIP SF-19 scores at baseline were 57 (49-64), 67 (63-72), and 47 (42-53) for the Twin-Block, the fixed appliance, and the malocclusion groups, respectively. Two-month mean scores adjusted to the baseline scores were 64.82 ± 1.15, 65.65 ± 1.47, and 54.45 ± 1.44 for the Twin-Block, the fixed appliance, and the malocclusion groups, respectively. CONCLUSIONS: Both at baseline and two-months (adjusted to the baseline scores), participants in the malocclusion group showed compromised socio-emotional quality of life and reported the poorest total OHRQoL. At the baseline, better socio-emotional and total OHRQoL was reported by the fixed appliance group compared to the Twin-Block group but, after two months both groups gave similar sores. Therefore; patients' perceptions about their experience with the orthodontic appliance might change.

Post-treatment stability after 5 years of retention with vacuum-formed and bonded retainers-a randomized controlled trial.

BACKGROUND: Retention after orthodontic treatment is still a challenge and more evidence about post-treatment stability and patients' perceptions of different retention strategies is needed. OBJECTIVES: This trial compares removable vacuum-formed retainers (VFR) with bonded cuspid-to-cuspid retainers (CTC) after 5 years of retention. TRIAL DESIGN: A single centre two-arm parallel-group randomized controlled trial. METHODS: This trial included 104 adolescent patients, randomized into two groups (computer-generated), using sequentially numbered, opaque, and sealed envelopes. All patients were treated with fixed appliances in both jaws with and without tooth extractions. Patients in the intervention group received a VFR in the mandible (n = 52), and patients in the active comparator group received a CTC (n = 52). Both groups had a VFR in the maxilla. Dental casts at debond (T1), after 6 months (T2), after 18 months (T3), and after 5 years (T4) were digitized and analysed regarding Little's Irregularity Index (LII), overbite, overjet, arch length, and intercanine and intermolar width. The patients completed questionnaires at T1, T2, T3, and T4. RESULTS: Post-treatment changes between T1 and T4 in both jaws were overall small. In the maxilla, LII increased significantly (median difference: 0.3 mm), equally in both groups. In the mandible, LII increased significantly in the group VFR/VFR (median difference: 0.6 mm) compared to group VFR/CTC (median difference: 0.1 mm). In both groups, overjet was stable, overbite increased, and arch lengths decreased continuously. Intercanine widths and intermolar width in the mandible remained stable, but intermolar width in the maxilla decreased significantly. No differences were found between groups. Regardless of retention strategy, patients were very satisfied with the treatment outcome and their retention appliances after 5 years. LIMITATIONS: It was not possible to perform blinded assessments of digital models at follow-up. CONCLUSIONS: Post-treatment changes in both jaws were small. Anterior alignment in the mandible was more stable with a bonded CTC retainer compared to a removable VFR after 5 years of retention. Patients were equally satisfied with fixed and removable retention appliances. TRIAL REGISTRATION: ClinicalTrials.gov (NCT03070444).

[Cephalometric evaluation of patients with ß-thalassemia major living in Azerbaijan]. / Analiz dannykh tsefalometricheskikh issledovanii u patsientov s bol'shoi ß-talassemiei, prozhivaiushchikh v Azerbaidzhane.

The aim of the study was to evaluate cephalometric rates in transfusion dependent patients with ß-thalassemia major living in Azerbaijan. The study group included 21 adolescents (mean age 12.7±0.6 years) with ß-thalassemia major while 23 patients (mean age 13.3±0.5 years) with no congenital pathology served as controls. The study results showed that adolescent with ß-thalassemia major have class II malocclusion (

Comparison of dental arch measurements according to the grade and the obstructive character of adenoids.

INTRODUCTION: Obstructive adenoid hypertrophy is cited as one of the causes of mouth breathing and leads to disharmony in the development of orofacial structures. The objective of this study was to compare the measurements of dental arches according to the grade and the obstructive character of adenoids. MATERIALS AND METHODS: A cross-sectional study was carried out with 86 children. The grade and the obstructive character of adenoids were determined from Holmberg and Cohen's radiographic methods respectively. Dental arch measurements were taken on dental casts. A t-test and a Chi2 test were performed respectively to compare the quantitative and qualitative variables of dental arches according to the obstructive character. An Anova test made it possible to compare the quantitative variables according to the grade as Holmberg defined it. For variables that showed significant differences, a Post Hoc test was used. The significance level was set at P=0.05. RESULTS: Subjects with obstructive adenoids had a shorter posterior mandibular length (P=0.04) and a greater overbite (P=0.04) than those with non-obstructive adenoids. Those with grade 4 had a greater arch depth (P=0.02) and were more prone to open bite(P=0.03). CONCLUSION: A prevention program involving the otorhinolaryngologist and the orthodontist for subjects with obstructive adenoids or grade 4 is necessary to minimize their influence on dental arch relationships.

The association between nutritive, non-nutritive sucking habits and primary dental occlusion.

BACKGROUND: The development of primary dentition can be affected by oral sucking habits. Therefore, this study aims to investigate the association of nutritive and non-nutritive sucking habits with primary dentition development. METHODS: One thousand one hundred and fourteen children aged 2 to 5 years old in Hong Kong were recruited in a cross-sectional study. Information on their nutritive (e.g. breastfeeding and bottle feeding) and non-nutritive sucking habits (e.g. pacifier use and thumb/digit sucking) was collected via questionnaires. The children's primary occlusions were examined in three dimensions. RESULTS: Children who were breastfed for more than 6 months had a lower proportion of daily pacifier use (p < 0.05). Children who used pacifiers daily had a higher proportion of thumb/digit sucking (p < 0.05). Children who used pacifiers daily for more than one year had higher chances of developing an anterior open bite (p < 0.05) and a reduced overbite (p < 0.05). Those exhibiting daily thumb/digit sucking for more than one year had higher chances of developing Class II incisor and Class II canine relationships, an increased overjet and anterior open bite (p < 0.05). CONCLUSION: Pure breastfeeding for more than 6 months is inversely associated with daily pacifier use and daily pacifier use is positively associated with daily thumb/digit sucking. Children with more than one year of daily pacifier use and thumb/digit sucking have higher chances of developing abnormal dental relationships in the sagittal (i.e. Class II incisor and Class II canine relationships and increased overjet) and vertical (i.e. anterior open bite) dimensions, respectively.

Orthodontics and Moebius syndrome: an observational study.

BACKGROUND: Moebius syndrome is a rare condition characterized by bilateral facial and abducens nerve paralysis. The aim of this study is to evaluate the main orthodontic features and the frequency of associated clinical characteristics in patients with Moebius syndrome (MS). METHODS: According to Terzis classifications, 58 patients with MS aged 8 months to 46 years old underwent orthodontics and clinical examination. RESULTS: Strabismus, upper and lower limb malformations, lip and palatal cleft were frequently associated with MS. Reduced TM movements were noted (48%). Cephalometric analysis did not allow identifying a typical facies and a characteristic cephalometric pattern; we have noticed a higher prevalence of Class II (56%) with micrognathia and excessive maxillary development probably due to the lack of lip seal. Early treatment is recommended, with a multidisciplinary approach to reduce the impact of sequelae on the lives of MS patients or their families. CONCLUSIONS: Early treatment is recommended, with a multidisciplinary approach to diminish the impact of sequelae on the lives of MS patients or their families.

Dental anomalies in different growth and skeletal malocclusion patterns.

OBJECTIVES: To evaluate prevalence, distribution, and sexual dimorphism of dental anomalies (DA) among different skeletal malocclusions (SM) and growth patterns (GP) under the hypothesis that specific clinical patterns exist and may indicate common etiological roots. MATERIALS AND METHODS: A total of 1047 orthodontic records of patients older than 8 years were evaluated. The SN-GoGn angle was used to classify GP (hypodivergent, normal, and hyperdivergent), and the ANB angle was used to verify SM (Angle Classes I, II, and III). These assessments were done from lateral cephalometric radiographs. DA were diagnosed using panoramic radiographs by one calibrated investigator. Odds ratios, chi-square, and Student's t-tests were used. RESULTS: Of the subjects, 56.7% were female, with mean age of 16.41 (±10.61) years. The prevalence of DA was 15.7%. Impaction and tooth agenesis were the most prevalent DA, with relative frequencies of 14.4% and 9.7%, respectively. DA were most prevalent in Class III SM (80.8%) and in hypodivergent GP (82.5%), although this was not statistically significant. Tooth agenesis ( P < .01) and microdontia ( P = .025) were significantly more common among hypodivergent GP and Class III SM, respectively. CONCLUSIONS: The results of this study support the idea that DA are preferentially associated with certain patterns of malocclusion.

Dentoskeletal effects of oral appliance wear in obstructive sleep apnoea and snoring patients.

OBJECTIVES: To evaluate the dentoskeletal changes associated with long-term and continuous mandibular advancement device (MAD) use in sleep-related breathing disorder patients. METHODS: Cephalometric measurements and three-dimensional model analysis were performed at baseline and after 3.5 ± 1.1 years in 20 snoring and obstructive sleep apnoea patients treated with the Silensor® appliance. Intra-group differences were compared using paired t-test or Wilcoxon signed-rank test. A regression analysis was performed for variables that showed a statistically significant difference between time points to evaluate the influence of treatment time and patient's initial characteristics on their variations. The statistical significance was set at P < 0.05. RESULTS: At cephalometric assessment, the maxilla revealed a significant decrease in horizontal position (SNA: -0.4 ± 0.72 degree, P = 0.021) and a significant retroclination of the upper incisor (-1.59 ± 1.07 degree, P < 0.001), while the mandible displayed a significant downward rotation (0.88 ± 1.28 degree, P = 0.006) and a proclination of the lower incisor (2.27 ± 1.38 degree, P < 0.001). Model analysis showed a decrease in upper total space discrepancy (-0.66 ± 0.72 mm, P < 0.002), overjet (OJ; -0.34 ± 0.47 mm, P < 0.011), and overbite (-0.4 ± 0.52 mm, P < 0.004). In the regression analysis, treatment time influenced the lower incisor inclination (Beta = -0.713, P = 0.018) and OJ (Beta = -0.218, P = 0.018); patients' initial characteristics had an effect on OJ (Beta = -0.195, P = 0.011). LIMITATIONS: A larger sample size could increase the generalizability of the findings. CONCLUSION: MAD wear after a mean of 3.5 years determines statistically significant but clinically irrelevant dentoskeletal changes. Their potential occurrence should be thoroughly discussed with patients; regular follow-up visits by a specialist experienced in dental sleep medicine are also mandatory during treatment in addition to polysomnographic examinations.

Canine-lateral incisor transposition: Controlling root resorption with a bone-anchored T-loop retraction.

A 12-year-old girl presented with a Class II Division 1 malocclusion, complicated by a complete transposition of the maxillary left canine into the position normally occupied by the left lateral incisor. Dental and medical histories were noncontributory. Brackets were bonded on all maxillary teeth, from first molar to first molar, except for the left lateral incisor. Because the lateral incisor was not engaged on the archwire, the tooth was free to physiologically move out of the path of canine root movement. To prepare the site for canine retraction, a coil spring was used to open space between the left central incisor and the first premolar. A 2 × 12-mm stainless steel miniscrew was placed in the infrazygomatic crest, labial to the mesiodistal cusp of the maxillary left first molar. A 0.019 × 0.025-in titanium-molybdenum alloy T-loop, anchored by the miniscrew, was used to retract the canine root over the labial surface of the root of the distally positioned lateral incisor. In 24 months, this difficult malocclusion, with a Discrepancy Index score of 18, was treated to a Cast-Radiograph Evaluation score of 26.

Pharyngeal airway effects of Herbst and skeletal anchored Forsus FRD EZ appliances.

BACKGROUND AND OBJECTIVE: To evaluate the skeletal and pharyngeal airway effects of skeletal anchored Forsus FRD EZ appliance using bilateral miniplates inserted on mandibular symphyses and to compare the findings with a well matched control group treated using a Herbst appliance. METHODS: Thirty patients with skeletal Class II malocclusion due to mandibular retrusion were divided into two groups. Group 1 consisted of 15 patients (8 females and 7 males; mean age: 13.11 ± 1.29 years) treated using the Herbst appliance and Group 2 consisted of 15 patients (9 females and 7 males; 12.84 ± 1.27 years) treated using the skeletal anchored Forsus FRD EZ appliance. Treatment changes were assessed by means of linear, angular, and area measurements. RESULTS: The groups were well matched regarding to the chronological ages, gender distribution and initial cephalometric values (P > 0.05). In both groups, skeletal Class II malocclusion was corrected by decrease in SNA and increase in SNB, Co-Gn, VRL-B and VRL-Pog measurements. Those changes caused a significant correction in the maxillo-mandibular relationship. Upper and lower pharyngeal airway dimensions were increased in both group, while the increase in the lower pharyngeal dimension was found to be statistically significant in the skeletal anchored Forsus FRD EZ group (P < 0.05). Oropharyngeal area measurements significantly increased in both groups (P < 0.001 and P < 0.01, respectively). Comparison of the groups showed that both groups had similar changes with no statistically significant differences (P > 0.05). CONCLUSION: Skeletal changes produced by both appliances caused significant pharyngeal airway changes.

Class II malocclusion with accentuated occlusal plane inclination corrected with miniplate: a case report.

INTRODUCTION: A canted occlusal plane presents an unesthetic element of the smile. The correction of this asymmetry has been typically considered difficult by orthodontists, as it requires complex mechanics and may sometimes even require orthognathic surgery. OBJECTIVE: This paper outlines the case of a 29-year-old woman with Class II malocclusion, pronounced midline deviation and accentuated occlusal plane inclination caused by mandibular deciduous molar ankylosis. METHODS: The patient was treated with a miniplate used to provide anchorage in order to intrude maxillary teeth and extrude mandibular teeth on one side, thus eliminating asymmetry. Class II was corrected on the left side by means of distalization, anchored in the miniplate as well. On the right side, maxillary first premolar was extracted and molar relationship was kept in Class II, while canines were moved to Class I relationship. The patient received implant-prosthetic rehabilitation for maxillary left lateral incisor and mandibular left second premolar. RESULTS: At the end of treatment, Class II was corrected, midlines were matched and the canted occlusal plane was totally corrected, thereby improving smile function and esthetics.

Class II malocclusion with accentuated occlusal plane inclination corrected with miniplate: a case report

ABSTRACT Introduction: A canted occlusal plane presents an unesthetic element of the smile. The correction of this asymmetry has been typically considered difficult by orthodontists, as it requires complex mechanics and may sometimes even require orthognathic surgery. Objective: This paper outlines the case of a 29-year-old woman with Class II malocclusion, pronounced midline deviation and accentuated occlusal plane inclination caused by mandibular deciduous molar ankylosis. Methods: The patient was treated with a miniplate used to provide anchorage in order to intrude maxillary teeth and extrude mandibular teeth on one side, thus eliminating asymmetry. Class II was corrected on the left side by means of distalization, anchored in the miniplate as well. On the right side, maxillary first premolar was extracted and molar relationship was kept in Class II, while canines were moved to Class I relationship. The patient received implant-prosthetic rehabilitation for maxillary left lateral incisor and mandibular left second premolar. Results: At the end of treatment, Class II was corrected, midlines were matched and the canted occlusal plane was totally corrected, thereby improving smile function and esthetics.

RESUMO Introdução: o plano oclusal inclinado representa um elemento antiestético para o sorriso. A correção dessa assimetria é normalmente considerada difícil pelos ortodontistas, requerendo mecânica complexa e, algumas vezes, até cirurgia ortognática. Objetivo: esse artigo descreve o caso de uma paciente de 29 anos, portadora de má oclusão de Classe II, com considerável desvio das linhas médias e acentuada inclinação do plano oclusal, causada pela anquilose de molar decíduo inferior. Métodos: a paciente foi tratada com ancoragem em miniplaca, para promover a intrusão dos dentes superiores e extrusão dos dentes inferiores em um lado, eliminando a assimetria. A Classe II foi corrigida no lado esquerdo por meio de distalização, também ancorada na miniplaca. No lado direito, o primeiro pré-molar superior foi extraído e a relação de molares de Classe II foi mantida, enquanto os caninos foram movidos para relação de Classe I. A paciente recebeu reabilitação por meio de implante e prótese no incisivo lateral superior esquerdo e no segundo pré-molar inferior esquerdo. Resultados: ao término do tratamento, a Classe II foi corrigida, as linhas médias estavam coincidentes e a inclinação do plano oclusal foi totalmente corrigida, melhorando consideravelmente os aspectos funcionais e estéticos da oclusão.

Tratamento da classe II com o auxílio de aparelhos funcionais fixos / Class II treatment with the aid of fixed functional appliances

A má-oclusão de classe II foi descrita por Angle e é caracterizada por alterações dentárias e/ou esqueléticas. Seja qual for a combinação dos fatores que acometem o paciente de classe II, o sulco vestibular do molar inferior encontra-se distalmente à cúspide mesiovestibular do molar superior. Estratégias biomecânicas para estabelecer a correta relação entre os arcos envolvem elásticos intermaxilares e dispositivos removíveis que necessitam da colaboração do paciente, ou ainda de aparelhos funcionais fixos, os quais dispensam a colaboração e prometem maior eficiência clínica. O objetivo deste artigo foi revisar as características gerais destes tipos de aparelho, sua forma de funcionamento e aplicabilidades clínicas.

The class II malocclusion has been described by Angle and characterized by dental and/or skeletal abnormalities. Whatever the combination of factors that affect the class II patients, the buccal groove of the lower molar is distal to the mesiobuccal cusp of the upper molar. Biomechanical strategies to establish the correct relationship between the archs involve intermaxillary elastics and removable devices that require the patient's cooperation or fixed functional appliances, which do not require collaboration and promise greater clinical efficiency. The aim of this article was to review the general characteristics of these types of appliance, how they work, and their and clinical applications.

Evaluation of long-term stability of mesiodistal axial inclinations of maxillary molars through panoramic radiographs in subjects treated with Pendulum appliance.

OBJECTIVE: To evaluate the stability of mesiodistal inclination of maxillary molars produced by a pendulum appliance, five years after completion of orthodontic treatment. Angulation changes were compared to an untreated sample. METHODS: The sample consisted of 20 patients (14 females and 6 males) with Class II, Division 1 malocclusion that was treated through molar distalization with a pendulum appliance followed by cervical headgear and full fixed appliances. Maxillary molar inclination was evaluated through panoramic radiograph. The mean age at pretreatment was 14.3 ± 1.6 years, whereas at immediate post-treatment it was 18.6 ± 1.8 years, and at long-term post-treatment it was 23.8 ± 2.0 years. A control group of 16 untreated individuals with untreated normocclusion ranging in age from 12 to 17 years old were used as comparison group. Data were statistically analyzed with independent t-tests and ANOVA test followed by Tukey post-hoc tests. RESULTS: Statistically significant differences were found between T1(94.50) and T2 (98.80) as well as between T2 and T3 (94.70) for maxillary first molars. Maxillary second molars did not show any statistically significant positional changes during the evaluated time periods T1 (107.50), T2 (109.30) and T3 (106.90). CONCLUSION: Although maxillary first molars underwent distal crown inclination immediately after treatment, approximately five years thereafter their roots tended to upright close to the pretreatment positions.

Orthognathic Surgery in Patients With Large Condylar Destructions.

Condylar resorption is understood as changes in shape and volume of the condylar bone, due to local, systemic, and iatrogenic factors. The occurrence of condylar resorption after orthognathic surgery can occur when the condylar repositioning in mandibular fossa is performed improperly. In addition, systemic diseases such as osteoarthritis and rheumatoid arthritis seem to influence this process. The aim of this study was to report 3 cases of patients with severe condylar alterations, submitted to orthognathic surgery for treatment of dentofacial deformities. Considerations regarding the diagnosis, surgical planning (counterclockwise rotation), surgical techniques (bilateral sagittal split osteotomy, bimaxillary osteotomies, rigid fixation, maxillomandibular fixation period), and results (short terms) are discussed.

Evaluation of long-term stability of mesiodistal axial inclinations of maxillary molars through panoramic radiographs in subjects treated with Pendulum appliance

Objective: To evaluate the stability of mesiodistal inclination of maxillary molars produced by a pendulum appliance, five years after completion of orthodontic treatment. Angulation changes were compared to an untreated sample. Methods: The sample consisted of 20 patients (14 females and 6 males) with Class II, Division 1 malocclusion that was treated through molar distalization with a pendulum appliance followed by cervical headgear and full fixed appliances. Maxillary molar inclination was evaluated through panoramic radiograph. The mean age at pretreatment was 14.3 ± 1.6 years, whereas at immediate post-treatment it was 18.6 ± 1.8 years, and at long-term post-treatment it was 23.8 ± 2.0 years. A control group of 16 untreated individuals with untreated normocclusion ranging in age from 12 to 17 years old were used as comparison group. Data were statistically analyzed with independent t-tests and ANOVA test followed by Tukey post-hoc tests. Results: Statistically significant differences were found between T1(94.50) and T2 (98.80) as well as between T2 and T3 (94.70) for maxillary first molars. Maxillary second molars did not show any statistically significant positional changes during the evaluated time periods T1 (107.50), T2 (109.30) and T3 (106.90). Conclusion: Although maxillary first molars underwent distal crown inclination immediately after treatment, approximately five years thereafter their roots tended to upright close to the pretreatment positions.

Objetivo: avaliar a estabilidade da inclinação mesiodistal dos molares superiores cinco anos após o tratamento realizado com o aparelho Pendulum seguido de aparelho ortodôntico fixo. As mudanças na angulação foram comparadas com uma amostra não tratada. Métodos: a amostra consistiu de 20 pacientes (14 do sexo feminino e 6 do masculino) com má oclusão de Classe II, divisão 1 tratados por meio da distalização dos molares com o aparelho Pendulum seguido de ancoragem extrabucal cervical e aparelho fixo. A inclinação dos molares superiores foi avaliada por meio de radiografias panorâmicas. A média da idade ao início do tratamento foi de 14,3 ± 1,6 anos; ao final do tratamento, de 18,6 ± 1,8 anos e, no longo tempo pós-tratamento, de 23,8 ± 2,0 anos. Para comparação, foi usado um grupo controle com 16 indivíduos não tratados e com oclusão normal, apresentando idades entre 12 e 17 anos. Os dados foram analisados estatisticamente pelo teste t independente e ANOVA, seguido do teste de Tukey. Resultados: os primeiros molares superiores apresentaram diferenças estatisticamente significativas entre T1 (94,5o) e T2(98,8o), bem como entre T2 e T3(94,7o). Os segundos molares superiores não apresentaram alterações estatisticamente significativas no seu posicionamento durante os períodos avaliados, T1 (107,5o), T2(109,3o) e T3 (106,9o). Conclusões: apesar de os primeiros molares superiores apresentarem inclinação distal da coroa imediatamente após o tratamento, aproximadamente cinco anos depois suas raízes tendem a ocupar posições próximas às do início do tratamento.

Treatment Decisions in Class II subdivision Malocclusions: Three Case Reports with Contrasting Strategies.

Class II Subdivision refers to the asymmetric molar relationship that can be commonly accounted to dental and occasionally to the skeletal disharmony. Furthermore, the discrepancy may be present in the maxilla or the mandible. To put it differently, Class II subdivisio) is a heterogeneous group of malocclusions and cannot be considered as a discrete entity to be treated with predefined specific strategies. Treatment goals encompass the usual cook-book approach and entail the orthodontists to think-before-act strategy considering all the parameters that may be affected favorably or deleteriously while executing a specifie plan. Treatment options may vary from non-extraction to 4premolar extractions depending upon the site and severity of the malocclusion. Another consideration would be the indispensable side-effects of the biomechanics involved that may be symmetric or asymmetric, again depending upon the needs of the patient. These not only require thorough diagnosis but clarity in the treatment goals. This article will briefly outline the important considerations while treating Class II subdivision cases with the help of examples of3 patients bearing different etiologies treated with contrasting strategies.

[Comparison of the dental measurements according to the obstructive character of the tonsils]. / Comparaison des mensurations d'arcades selon le caractère obstructif des amygdales palatines.

INTRODUCTION: The role of obstructive tonsils in dental arches abnormalities is widely discussed in the literature but remains controversial. Data on the probable relationship between obstructive tonsils and the presence of these orthodontic abnormalities are subjective. The objective of this study is to quantify the relationship between the obstructive character of the tonsils and the dental arches measurements. MATERIALS AND METHODS: A cross-sectional study was performed in children aged between 6 to 12 years divided into 2 groups (A and B) according to the obstructive character of the tonsils. Dental intra- and inter-arches measurements are recorded on each child. Data is analyzed using SPSS 20.0 for Windows. A t Student and chi square tests are respectively used to compare quantitative and qualitative variables according to the obstructive character of the tonsils. The level of significance is fixed at p = 0.05. RESULTS: The upper dental arch depth is significantly more important in subjects with obstructive tonsils (group B). Dental arches widths are significantly more important in subjects without obstructive tonsils (group A). Group B subjects are significantly more likely to have class II malocclusions, open bite and posterior cross bite with mandibular lateral deviation than group A subjects. CONCLUSION: Early evaluation of children with obstructive tonsils can prevent dental intra- and inter-arches abnormalities caused by upper airway obstruction. Thus late and more aggressive treatments which are not always as efficient as when they were performed during childhood will be avoided.

Multiple tooth anomalies in a nonsyndromic patient with class II division 2 malocclusions: A case report and a literature review.

Reports in the literature about the craniofacial characteristics of patients with class II division 2 malocclusions show a lot of different patterns accompanied by palatally displaced upper incisors, congenital missing teeth, polydiastema, fusion, germination, tooth impaction, peg-shaped lateral incisors, persistent teeth, hypodontia, persistent deciduous teeth, transpositions, and supernumerary teeth. The following case report focuses on the description of the clinical characteristics observed on a patient with a very unusual conjunction of dental and skeletal anomalies mentioned above, as well as a literature review on the related issues. Extra-intra-oral examinations, radiographic evaluations, orthodontic consultation, and reviewing the literature concluded that this nonsyndromic patient that refused to receive all dental treatment approaches is special with its uniqueness.